The product was developed by Architecture Institute of Metallurgy Ministry who refer to the similar product of West Germany and passed the technology appraisal of Metallurgy Ministry. It is furfuralcohol-furfural furan resin with low viscosity,high adherence strength, good heat resistant and good anticorrosive in all organic solvents.It is an ideal adhesive because of its acid resistant and alkali resistant to be used on some occasions where can't use epoxy resin,phenolic resin and unsaturated polyester resin.(to produce glass fibre reinforced plastic when mixed with the powder of glass fibre reinforced plastic, to produce clay when mixed with clay powder,to produce mortar when mixed with mortar powder). The product shows good resistant to most of acid and alkali and can be used under the temperature of about 140.

   YJ furan resin belongs to furfuralcohol-furfural resin with low viscosity,excellent resistant to acid,alkali and solution,high adherence strength and good heat resistant.

1. Technical Index

Appearance: fulvous viscous liquid	Water Content 0.5%
Viscosity: 20-30s(spread-4)	Density1.18/cm3

2. Usage

YJ furan resin is used in the anti-penetration layer of furan resin-glass fibre reinforced plastic,furan resin-clay lined with cast slate and granite stone,the tank, pool and ground of furan resin-concrete,also used as lining in various equipment to resist corrosive.

3. Proportioning:

Item	Furan-clay	Furan-mortar	Furan-glass fibre reinforced plastic
YJ furan resin	1	1	1
clay powder	3.5-4
mortar powder		2.5-2.7
powder of glass fibre reinforced plastic			0.3-0.5

4. Main Physical Property

Item	Furan-clay	Furan-mortar	Furan-glass fibre reinforced plastic
Capacity	2	2.2	1.7
Compression strength,MPa	85	60
Tensile strength, MPa	8.5	8	85
Adherence strength with tiling,MPa	3	2.8
Use time(20), minutes	45	45	45
Hardening time(20),hour	12	12	12
The highest use temperature,	140	140	140

5. Main Anticorrosive Property

Medium	Anticorrosive level	Medium	Anticorrosive level
5-60%sulfuric acid	good	5-10% sodium hydroxide	good
31% hydrochloric acid	passable	toluene	good
5-20% hydrochloric acid	good	water	good
10% nitric acid	passable	3% sodium chloride	good
5% nitric acid	good	alternating between 40% sulfuric acid and 10% sodium hydroxide	good
10% chromic acid	passable	alternating between 20% sulfuric acid and 10% sodium hydroxide	good
5% chromic acid	good

6. Usage Method

The product is of appropriate thickness,good mixedness and reliable quality,according with the current technology standard of anticorrosive engineering of furan resin CECS 01:1988,the construction and check-accept standard of building anticorrosive engineering GB 50212-91,and the anticorrosive design standard of industrial buildings GB 50046-95.

7. Storage and Package (stored in the ventilated and dry place)

The period of validity of YJ furan resin is one year(200KG/barrel), the period of validity of clay powder is one year(50KG/bag)

The period of validity of mortar powder is one year (50KG/bag), the period of validity of glass powder is one year (50KG/bag)